Technical Data Sheet
CAT6 UTP 23AWG COPPER – LSZH (LOW SMOKE ZERO HALOGEN)
Construction
| Conductor | Solid Bare Copper & Conductor Dia.: 0.57 ± 0.003mm |
| Insulation | Raw material of the insulation: PE |
| 4 Twisted Pairs | Blue/white-blue; Green / white-green; Orange / white-orange; Brown / white-brown; Insulation Dia.: 1.02 ± 0.005mm |
| Average thickness | 0.2125mm |
| Minimum point thickness | 0.21mm |
| Separator | Center cross |
| Rip Cord | Nylon thread |
| Jacket | Jacket Material: LSZH (Low Smoke Zero Halogen) Color: Orange Nominal Dia.: 6.3 ± 0.2mm Average thickness: 0.60mm Minimum point thickness: 0.50mm |
Application
Primary(Campus), Secondary(Riser), Tertiary(Horizontal)
IEEE802.3: 10 Base-T ; 100 Base-T ; 1000 Base-t ;
IEEE802.5 16MB ; RDSI/ISDN; 100 Mbps TPDDI; 155 Mbps ATM
Standard
| TIA/EIA 568.B | EN50173-1 |
| IEC/ISO11801 | EN50288-6-1 |
Packing
305 Meter Pull Box
Mechanical Properties
| Minimum Bending Radius | Installation： 8×O.D. Installed： 4×O.D. |
| Temperature Range | During operation： -55 °C — +60 °C During installation： -15 °C — +50 °C |
| Max Tensile Load | During operation： — During installation： 110N |
Electrical Properties
| Resistance unbalance | ≤ 2% |
| Loop impedance | ≥110 MΩ/km |
| Capacitance | 230pF/m |
| Capacitance unbalance | ≤330 pF/100m |
| Characteristic impedance | 1-100Mhz: (100±15) Ω |
| Nominal velocity of propagation | ≥Approximate 62% |
| Propagation delay | ≤537 ns/100m @ 100mhz |
| Delay skew | Nominal 45 ns/100m, 1-250 Mhz |
| Test voltage (DC, 1 min) | 1000v |
Nominal Transmission Characteristics
