Technical Data Sheet
CAT6 S/FTP 23AWG COPPER
Construction
| Conductor | Solid Bare Copper & Conductor Dia.: 0.57 ± 0.003mm |
| Insulation | Raw material of the insulation: PE |
| 4 twisted pairs | Blue/white-blue; Green / white-green; Orange / white-orange; Brown / white-brown; Insulation Dia.: 1.18 ± 0.005mm |
| Average thickness | 0.3025mm |
| Minimum point thickness | 0.30mm |
| Divider | Center cross |
| Separator | PET |
| Drain Wire | 0.4mm drain wire |
| Inner Screen | AL foil (good) |
| Outer Screen | 96/0.12mm AL-MG braiding wire |
| Rip Cord | Nylon thread |
| Jacket | Jacket Material: PVC Color: Grey Nominal Dia.: 7.7 ± 0.2mm Average thickness: 0.65mm Minimum point thickness: 0.50mm |
Application
Primary(Campus), Secondary(Riser), Tertiary(Horizontal)
IEEE802.3: 10 Base-T ; 100 Base-T ; 1000 Base-t ;
IEEE802.5 16MB ; RDSI/ISDN; 100 Mbps TPDDI; 155 Mbps ATM
Standard
| TIA/EIA 568.B | EN50173-1 |
| IEC/ISO11801 | EN50288-6-1 |
Packing
305 Meter Drum/Wood Pallet
Mechanical Properties
| Minimum Bending Radius | Installation: 8×O.D. Installed: 4×O.D. |
| Temperature Range | During operation: -55°C — +60℃
During installation: -15℃ — +50℃ |
| Max Tensile Load | During operation: —
During installation: 120N |
Electrical Properties
| Resistance unbalance | ≤ 2% |
| Loop impedance | ≥90 MΩ/km |
| Capacitance | 230pF/m |
| Capacitance unbalance | ≤330 pF/100m |
| Characteristic impedance | 1-100Mhz: (100±15) Ω |
| Nominal velocity of propagation | ≥Approximate 62% |
| Propagation delay | ≤537 ns/100m @ 100mhz |
| Delay skew | Nominal 45 ns/100m, 1-250 Mhz |
| Test voltage (DC, 1 min) | 1000v |
Nominal Transmission Characteristics
